| | | Scilab Reference Manual | |
|---|
iir — iir digital filter
[hz]=iir(n,ftype,fdesign,frq,delta)
| n | : filter order (pos. integer) | ||||||
| ftype | : string specifying the filter type 'lp','hp','bp','sb' | ||||||
| fdesign | : string specifying the analog filter design ='butt','cheb1','cheb2','ellip' | ||||||
| frq | : 2-vector of discrete cut-off frequencies (i.e., 0<frq<.5). For lp and hp filters only frq(1) is used. For bp and sb filters frq(1) is the lower cut-off frequency and frq(2) is the upper cut-off frequency | ||||||
| delta | : 2-vector of error values for cheb1, cheb2, and ellip filters where only delta(1) is used for cheb1 case, only delta(2) is used for cheb2 case, and delta(1) and delta(2) are both used for ellip case. 0<delta(1),delta(2)<1
|
function which designs an iir digital filter using analog filter designs.
hz=iir(3,'bp','ellip',[.15 .25],[.08 .03]);
[hzm,fr]=frmag(hz,256);
plot2d(fr',hzm')
xtitle('Discrete IIR filter band pass 0.15<fr<0.25 ',' ',' ');
q=poly(0,'q'); //to express the result in terms of the ...
hzd=horner(hz,1/q) //delay operator q=z^-1
C. B.
| << iirlp | intdec >> |